HPOP & Related

CNC Fabrication SD HPOP Line Set | 99-03 7.3L THESE LINES ARE TO REPLACE THE TYPICAL HIGH MILEAGE EXPENSIVE LEAKY OEM HPOP LINES THAT HAVE THE FORD STC FITTINGS. KIT COMES WITH TWO HOSES AND ALL NECESSARY FITTINGS TO ELIMINATE THE QUICK CONNECT FITTINGS...

CNC Fabrication Stage 1 High Pressure Oil Pump (HPOP) | 94-03 7.3L Powerstroke Typically these pumps will produce 5.1-5.6gpm which is usually enough volume to sustain 230/100 hybrid injectors. We do not list this pump as an aftermarket high performance...

DieselSite Adrenaline HPOP | 94-03 7.3L Powerstroke Generally, the stock High Pressure Oil Pump is a very reliable unit. But.. as miles go up or if you plan to run bigger injectors the stock HPOP can have a hard time keeping injection pressure...

CNC Fabrication Stage 2 High Pressure Oil Pump (HPOP) | 94-03 7.3L Powerstroke Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can be ran with this...

CNC Fabrication 4-Line Feed Fuel Line Kit | 99-03 7.3L Powerstroke Note: Looking to keep the stock fuel filter housing? This kit is for you. If you are looking to delete the stock filter housing, check out CNC Fab's VMFK kits for your truck...

Alliant Injection Pressure Regulator IPR (AP63402) | 95-03 7.3L Powerstroke OEM Part Numbers: F81Z9C968AA / F81Z9C968ABYear Range: 1995½–2003Application: F-Series, Excursion, E-SeriesNote: This IPR is for the Late 1995 - 2003...

ALLIANT IPR Complete Re-Seal kit | 94-03 7.3L Powerstroke Description: New o-rings (3), spacer and nut for the IPR valve that is installed in the High Pressure Oil Pump. Internal o-rings can get worn and have high pressure oil leak by causing rough...

Remanufactured High–Pressure Oil Pump OEM Part Number: F81Z9A543CRM Notes: Includes mounting gasket. Year Range: 1996–2003Application: F Series, E Series