CNC Fabrication
-
CNC Fabrication - Main Plate Girdle (421001) | 1997-2003 7.3L
CNC Fabrication
$769.95CNC Fabrication - Main Plate Girdle (421001) | 1997-2003 7.3L This main plate girdle will hold the bearing caps on your 7.3L Ford Powerstroke more rigid from higher torque to help prevent block...- SKU:
- CNC- 421001
- Availability:
- Usually ships in 1-2 days
$769.95 -
CNC Fabrication - HPOP System Re-seal Kit (424014) | 1994-2003 7.3L
CNC Fabrication
$32.95CNC Fabrication - HPOP System Re-seal Kit (424014) | 1994-2003 7.3L This will re-seal all 6 fittings on your CNC Fab 3 line HPOP Line kits along with the rear construction port and passenger side...- SKU:
- CNC-424014
- Availability:
- Usually ships in 1-2 business days
$32.95 -
CNC Fabrication - CNC HPOP Line Oring Kit (424013) | 1994-2003 7.3L
CNC Fabrication
$12.95CNC Fabrication - HPOP CNC Line Oring Kit (424013) | 1994-2003 7.3L Here's the solution you were looking for to re-seal your CNC Fabrication 7.3L HPOP line fittings. Contains enough o-rings to reseal...- SKU:
- CNC-424013
- Availability:
- Usually ships in 1-2 business days
$12.95 -
CNC Fabrication - Stainless Steel Transmission Cooler Line Kit | 1994-2003 7.3L
CNC Fabrication
$269.95CNC Fabrication - Stainless Steel Transmission Cooler Line Kit | 1994-2003 7.3L This kit is to replace your factory 4R100 or E4OD transmission cooler lines, and this kit comes with 3/8" or 1/2" hose...- Availability:
- Usually ships in 1-2 business days
$269.95 -
CNC Fabrication - Transmission Cooler Adapter Hose Kit | 1994-2003 7.3L
CNC Fabrication
$67.95CNC Fabrication - Transmission Cooler Adapter Hose Kit | 1994-2003 7.3L 94-97 This kit is to adapt your factory E4OD transmission cooler lines to a 6.0L Ford Powerstroke transmission cooler that has...- Availability:
- Usually ships in 1-2 business days
$67.95 -
CNC Fabrication - Transmission Filter bypass Manifold (425001-2) | 2003-2007 6.0L
CNC Fabrication
$159.95CNC Fabrication - Transmission Filter bypass Manifold (425001-2) | 2003-2007 6.0L This manifold block is for those who have already installed the Ford JOB2 5R110W transmission pan and filter found in...- Availability:
- Usually ships in 1-2 business days
$159.95 -
CNC Fabrication - High Pressure Oil Pump (42401x) | 2003-2004 6.0L
CNC Fabrication
$699.95 - $949.95CNC Fabrication - High Pressure Oil Pump (42401x) | 2003-2004 6.0L Stage 1 Outfitted with a new upgraded housing that cures the infamous "back plate wear-out" with the original design...- Availability:
- Usually ships in 1-.2 days
$699.95 - $949.95 -
CNC Fabrication - Replcement HPOP Line No Fittings (42400x) | 1994-2003 7.3L
CNC Fabrication
$79.95 - $89.95CNC Fabrication - Replcement HPOP Line No Fittings (42400x) | 1994-2003 7.3L Fittings are the same style as those used on the 94.5-97 powerstroke engines. All new Genuine Brennan™...- Availability:
- Usually ships in 1-2 business days
$79.95 - $89.95 -
CNC Fabrication - Valve Spring Upgrade Kit (42101x) | 1994-2003 7.3L
CNC Fabrication
$124.95 - $444.95CNC Fabrication - Valve Spring Upgrade Kit (42101x) | 1994-2003 7.3L **YOU WILL NEED TO MEASURE AND SHIM FOR INSTALL HEIGHT.** Stage 1 Kit: Install Height: 1.880" Seat Load: 119lbs @1...- Availability:
- Usually ships in 1-2 busness days
$124.95 - $444.95 -
CNC Fabrication - Billet Intake Plenums (42300x) | 1994 - E99 7.3L
CNC Fabrication
$399.95CNC Fabrication - Billet Intake Plenums (42300x) | 1994 - E99 7.3L These billet intake plenums are a nice upgrade over the stock flimsy stamped sheet metal and will not deform the center inlet port...- Availability:
- Usually ships in 3-5 days
$399.95 -
CNC Fabrication - Fuel Bowl Relocation Retrofit Block (42202x) | 1999-2003 7.3L
CNC Fabrication
$124.95CNC Fabrication - Fuel Bowl Relocation Retrofit Block (42202x) | 1999-2003 7.3L THIS IS NOT A COMPLETE BOWL DELETE KIT. MUST ALREADY HAVE ONE OF THE FUEL BOWL RETAIN KITS TO USE. Typically, most...- Availability:
- Usually ships in 1-2 business days
$124.95 -
CNC Fabrication - Billet Intake Plenums (42300x) | 1999.5 - 2003 7.3L
CNC Fabrication
$399.95CNC Fabrication - Billet Intake Plenums (42300x) | 1999.5 - 2003 7.3L These billet intake plenums are a nice upgrade over the stock flimsy stamped sheet metal and will not deform the center inlet...- Availability:
- Usually ships in 3-5 days
$399.95 -
Call for Availability
CNC Fabrication - Charge Air Cooler Boot Kit (42302x) | 2008-2010 6.4L
CNC Fabrication
$239.95CNC Fabrication - Charge Air Cooler Boot Kit (42302X) | 2008-2010 6.4L Features: 5 layer aramid reinforced silicone for high temp rating Rated to 180psi Stainless Steel American made T-bolts...- Availability:
- Usually Ships in 24 hours
$239.95 -
Call for Availability
CNC Fabrication - Replacment Plenum Boot Kit w/ Clamps (42302x) | 1994-1997 7.3L
CNC Fabrication
$79.95CNC Fabrication - Replacment Plenum Boot Kit w/ Clamps (CNC-423022) | 1994-1997 7.3L Description Features: 5 layer aramid reinforced silicone for high temp rating Rated to 180psi Stainless Steel...- Availability:
- Usually ships in 1-2 business days
$79.95 -
CNC Fab - 4-Line Feed Fuel Line Kit SD VMFK | 99.5-03 7.3L
CNC Fabrication
$394.95CNC Fab - 4-Line Feed Fuel Line Kit SD VMFK | 99.5-03 7.3L Upgrade your fuel system with our Late 99.5-03 4-line-feed fuel-line kit designed to eliminate many of the infamous leaks with the the...- Availability:
- Usually ships in 1-2 business days
$394.95 -
CNC Fab - 4-Line Feed Fuel Line Kit (T4) VMFK | 94.5~03 7.3L
CNC Fabrication
$394.95CNC Fab - 4-Line Feed Fuel Line Kit T4 VMFK | 94.5~03 7.3L Upgrade your 7.3L Powerstroke fuel system with our T4 mount 4 line feed fuel line kit.**DOES NOT FIT STOCK/DROP-IN TURBOS** TRUCK...$394.95 -
CNC Fab - 4-Line Feed Fuel Line Kit OBS/E99 VMFK | 94.5-1998 7.3L
CNC Fabrication
$394.95CNC Fab - 4-Line Feed Fuel Line Kit OBS VMFK | 94.5-98 7.3L Upgrade your fuel system with our 4-line-feed fuel-line kit designed to eliminate many of the infamous leaks from the mechanical fuel...$394.95 -
CNC Fab - Plenum Inserts | 94~03 7.3L
CNC Fabrication
$44.95CNC Fabrication Intake Plenum Reinforcement Inserts | 94-03 7.3L Powerstroke Aircraft quality billet aluminum bushings will help keep you from crushing/distorting the factory stamped sheet metal...- Availability:
- Usually Ships in 24 Hours
$44.95 -
CNC Fab - 4-Line Feed Fuel Line Kit Keeps Fuel Bowl BRFK | 99~03 7.3L
CNC Fabrication
$289.95CNC Fabrication 4-Line Feed Fuel Line Kit | 99-03 7.3L Powerstroke Note: Looking to keep the stock fuel filter housing? This kit is for you. If you are looking to delete the stock filter housing,...- Availability:
- Usually Ships in 24-48 Hours
$289.95 -
Call for Availability
CNC Fab - Boot & Clamp Kit | 99.5-03 7.3L
CNC Fabrication
$299.95CNC Fabrication Boot & Clamp Kit | 99.5~03 7.3L Powerstroke CNC Fabrication Upgraded Inter-cooler hose and clamp kit for Late 1999 through 2003.Features 5 layer aramid reinforced silicone for...- Availability:
- Usually Ships in 24 hours
$299.95