CNC Fabrication - High Pressure Oil Pump (42401x) | 1994-2003 7.3L

CNC Fabrication High Pressure Oil Pump (HPOP) | 94-03 7.3L Powerstroke

Stage 1

Typically these pumps will produce 5.1-5.6gpm which is usually enough volume to sustain 230/100 hybrid injectors. We do not list this pump as an aftermarket high performance pump, but it will indeed support certain performance injectors. It will not support larger A or B code injectors though. 

• Comes with a new gasket
• Exceeds OEM volume
• All of our pumps are fitted with steel thread inserts to ensure the threads will not rip out
• OBS (94.5-97) and early '99 pumps are fitted with a the Superduty internals for more volume
• New Viton o-rings to reuse your existing fittings
• Every pump is flow bench tested to assure you no DOA pumps, and flow at least the same volume as a brand new pump 
• Comes with a test flow result sheet

Stage 2

Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can be ran with this pump, but it is not a guarantee that it will keep up in a "hot/race" tune as there are variables between injector builders on how well they build them.

This pump is more recommended for 230-250cc hybrid injectors.  Anything larger will more than likely require a larger pump setup. 

• Comes with a new gasket
• 30% more flow over 99.5-03 stock pump (10-12% more than an Adrenaline HPOP)
• All of our pumps are fitted with steel thread inserts to ensure the threads will not rip out
• Upgraded internals for more flow
• New Viton o-rings to reuse your existing fittings
• Every pump is flow bench tested to assure you no DOA pumps.
• Comes with a test flow result sheet

Sending Core First?

Ship to:

CNC Fabrication
1103 S MAIN ST
BRYAN, OH 43506

Along with your shipping information, include your PO#