CNC Fab - OBS HPOP Line Set | 94~97 7.3L

CNC Fabrication OBS HPOP Line Set | 94-97 7.3L

THESE LINES ARE TO REPLACE THE TYPICAL HIGH MILEAGE EXPENSIVE OEM HPOP LINES. KIT COMES WITH TWO HOSES AND ALL NECESSARY FITTINGS. HOSES ARE UP-SIZED TO 3/8″, USING TOP OF THE LINE AEROQUIP HOSE UTILIZING DUPONT TEFLON LINING WITH A BURST PRESSURE RATING OF 16,000PSI AND WORKING TEMPERATURE RATING OF 400*F. NOMINAL WORKING PRESSURE IS 5000PSI @ 72*F AND 3000PSI @ 400*F (IF YOUR ENGINE OIL IS THIS HOT, YOU HAVE BIGGER ISSUES TO WORRY ABOUT)

NOTE: THESE LINE WILL ROUTE DIFFERENT THAN OEM. DRIVER SIDE WILL ROUTE JUST LIKE THE 99-03 MODELS. WHICH MEANS IT WILL NOW ROUTE TO THE SECOND OIL GALLEY PORT AND GO AROUND THE ENGINE LIFTING EYELET. THE PASSENGER SIDE LINE WILL ARCH SLIGHTLY OVER THE FRONT OF THE FUEL BOWL LID. THIS WILL NOT HINDER THE REMOVAL OF THE FUEL FILTER.

IF YOU ARE UNSURE OF INSTALLING THESE LINES YOURSELF, PLEASE SEEK OUT A COMPETENT AND QUALIFIED TECHNICIAN TO INSTALL THE LINES. ALSO, WHEN INSTALLING, THE DISC CHECK VALVES BEHIND THE HPOP FITTINGS NEED TO BE REMOVED. THEY ARE NOT NEEDED. IF YOU HAVE THE PROPER TOOLS TO CHECK TORQUE, THE FITTINGS ARE TO BE SET TO 28FT/LBS.